Setup 4: Mono TV and Stereo VCR

This setup lets you:

• Watch the channel or service of your choice
• Record a stereo digital program while you watch another, analog program
• Watch an analog program
• Watch a video

To watch the channel or service of your choice

• Press the CBL button on the remote control to turn on the EXPLORER® 2000.
• Turn on the TV and VCR.
• Tune the TV to channel 3.
• Select the LINE input on the VCR by pressing the LINE, AUX, AV or CAM button on the VCR, or by selecting channel 00, 01, 91 or 99, depending on how the LINE/TUNER switch on the VCR works (refer to the VCR instruction manual).
• Use the EXPLORER® 2000's remote control to tune in the channel or service of your choice. You will hear the programming in stereo through your sound system.

To record a stereo digital program while you watch another, analog program

• Select the LINE input on the VCR by pressing the LINE, AUX, AV or CAM button on the VCR, or by selecting channel 00, 01, 91 or 99, depending on how the LINE/TUNER switch on the VCR works (refer to the VCR instruction manual).
• Use the EXPLORER® 2000's remote control to tune in the channel you want to record from.
• Start the recording by pressing the REC button on the VCR.
• Select TV mode on the VCR using the TV/VCR button on the VCR's remote control.
• Tune in the analog channel of your choice using the TV's remote control (the lighted STEREO indicator on your TV will come on).

To watch an analog program

IN MONO:

• Select TV mode on the VCR using the TV/VCR button on the VCR's remote control (you can also simply turn off the VCR).
• Tune in the analog channel of your choice using the TV's remote control.

IN STEREO:

• Using the VCR's tuner, select the analog channel you want to watch.
• Tune the TV to channel 3.
• You will hear the programming in stereo either through your TV or your sound system.

To watch a video

• Tune the TV to channel 3.
• Press the PLAY button on the VCR.
• You will hear the programming in stereo through your stereo receiver/amplifier.