Connection to a stereo TV and a stereo VCR with or without a sound system

Your EXPLORER® model may be different from the one in the picture, but this does not change the method of connection and use.

Note: When you activate VIDEO or LINE input on your television or on your VCR, the stereo signal light will not light up but you will still hear the audio in stereo.

To watch the channel or of your choice in stereo:

• Turn on the EXPLORER® by pressing the CBL button on your EXPLORER® remote control
• Turn on the TV and the VCR with their respective remote controls.
• Select the VIDEO/AUDIO input on the TV by pressing the INPUT SELECT, INPUT, AUX, AVX or TV/VIDEO button of the TV remote control.
• Select the LINE input on the VCR by pressing the LINE, AUX, AV or CAM button of the VCR, or by tuning to channel 00, O1, 91 or 99, depending on how the LINE/TUNER switch works on the VCR. (Refer to the VCR instruction manual.)
• Use the EXPLORER® remote control to tune to the channel of your choice. You can then listen to your programs in stereo either through your TV or through your stereo receiver/amp.

To record the program in stereo that you are viewing:

• Follow the instructions for the previous operation to view the channel of your choice in stereo.
• Start recording by pressing the VCR's REC button and adjust the volume on the TV

To record a program in stereo during your absence:

• Adjust the volume of the EXPLORER® at maximum.
• Press the EXPLORER® remote SETTINGS button twice. Move the cursor to the TIMER: VCR option and follow the instructions on the screen. You can program the EXPLORER® to record various channels at various times.

Ex.:
Channel 25 Tuesday 26-08 from 8 a.m. to 9 a.m.
Channel 35 Tuesday 26-08 from 1:30 p.m. to 3 p.m.

• Use the VCR TIMER function of your VCR to start recording at the desired time. Refer to the following example to program the VCR TIMER function as follows:

Ex.:
Channel A/V (LINE) Tuesday 26-08 from 8 a.m. to 9 a.m.
Channel A/V (LINE) Tuesday 26-08 from 1:30 p.m. to 3 p.m.

To view a video or a pre-recorded program:

• Turn on the TV and the VCR.
• Select the VIDEO/AUDIO input on the TV by pressing the INPUT SELECT, INPUT, AUX, AVX or TV/VIDEO button of the TV remote control.
• Start playing the video (press the PLAY button). Adjust the volume on the TV or stereo tuner, depending on the connection established.

** To program your EXPLORER® remote control so that it can control the volume of your television, please read the "Programming your Remote Control" section in your detailed EXPLORER® user guide.