* The number 5 key is of rectangular shape.
* The REW, FF, PLAY, STOP and PAUSE functions change state when the VCR/VOD key is pressed. When the LED indicator is GREEN (VCR mode) the remote can control all the functions of a VCR/DVD (REW, FF, PLAY, STOP and PAUSE) that was previously programmed. When the LED indicator is RED (VOD mode) the remote is set to control the VOD session (REW, FF, PLAY, STOP & PAUSE) from the illico on Demand service.
* This remote control has the SmartKeys feature.
* It also offers the Point and Press ( CH+ key) feature to automatically search for the right device code.
1. Turn ON the selected device and point the remote control in the opposite direction of it.
2. Simultaneously press the TV and SELECT keys (or VCR and SELECT), and hold them until the chosen device key lights up.
3. Point the remote control in the direction of the chosen device and press the CH+ key. Keep it pressed until the selected device turns OFF. When it does, let go of the CH+ key.
4. Point the remote control in the direction of the chosen device and press the MUTE key. If the device turns ON, press the TV key (or VCR key) to confirm the code. The key will blink and turn OFF.
NOTE: If the device does not turn back ON, this means the correct code was passed. Press the CH- key to go back to the previous codes until the device turns ON, then press the TV or VCR key to confirm the code.
1. Turn you terminal ON.
2. In the provided list find the brand corresponding to the device you wish to control and its associated code. If the brand/code is not in the list, you can try using the rapid programming method (Point and Press).
3. Point the remote control in the opposite direction of your devices (terminal, TV, etc.)
4. Simultaneously press the TV and SELECT keys (or VCR and SELECT depending on the device you want to control). Keep both keys pressed until the red LED on the remote control is turned ON.
5. Point the remote control in the direction of your devices, then enter the code from the list. The red LED will light up each time you enter a digit. Pause in between each code. When the code is entered, shut down the TV and then press the MUTE key. If the TV turns back ON, press the TV key (or VCR in either case) to confirm the code. The red LED will blink and turn OFF. In case this does not work the first time around, repeat steps 4 and 5 using the next code until your selected device turns ON/OFF.
1. On the remote control simultaneously press the CBL and SELECT keys. Keep them pressed until the LED indicator lights up.
2. Press the VOL+ key then either the TV or CBL key depending which device you wish to control the volume of (TV for the TV's volume or CBL for the terminal's volume. The LED indicator will blink and turn OFF.
1. To reset the remote control, simultaneously press the CBL and SELECT keys, and hold both of them until the red LED lights up.
2. Press twice on the SETTINGS key. The red LED will blink and turn OFF.
1. Point the remote control in the opposite direction of your devices.
2. Simultaneously press the TV and SELECT keys, and hold them until the LED indicator blinks twice.
3. Using the remote numerical keypad, type 990. The LED indicator blinks twice when the last digit of the code is entered.
4. Using the remote numerical keypad, type1, then count the number of times the LED indicator blinks. This number is the first digit of the device code. If it does not blink, this means the first digit is 0 (zero).
5. Using the remote numerical keypad, type 2, then count the number of times the LED indicator blinks. This number is the second digit of the device code.
6. Using the remote numerical keypad, type 3, then count the number of times the LED indicator blinks. This number is the third digit of the device code.
7. AT2300 Remote control ONLY -> Using the remote numerical keypad, type 4, then count the number of times the LED indicator blinks. This number is the fourth digit of the device code.
From the get go the CBL and TV keys are used to turn ON/OFF the corresponding device. On the other hand, it is possible to program these keys to accomplish more than one thing at once.
Turn ON the terminal, TV and tune channel 03 in one operation:
1. Simultaneously press the CBL and SETTINGS keys until the LED indicator lights up.
2. In order, press CBL, TV, 0 (zero) and 3: the LED indicator lights up and stays open.
3. Press the CH+ key to confirm the setting: the LED indicator blinks and turns OFF.
4. To revert to the original setting, repeat step 1 and press the CH- key.
Turn the TV ON and tune channel 03 in one operation:
1. Simultaneously press the CBL and SETTINGS keys until the LED indicator lights up.
2. In order, press TV, 0 (zero) and 3: the LED indicator lights up and stays open.
3. Press the CH+ key to confirm the setting: the LED indicator blinks and turns OFF
4. To revert to the original setting, repeat step 1 and press the CH- key.
