Discover the meaning of the colour and blinking of the LED indicators on the Aruba 9004-LTE router, and get troubleshooting tips.
System
Green and solid
Up and running
Green and blinking
Software booting
Amber and solid
Critical alarm
Amber and blinking
Major alarm
WAN
Green and solid
All WAN ports on the router are connected.
Green and blinking
Ports are sending and receiving data.
Amber and solid
No WAN port connected.
Amber and blinking
One or more WAN ports are not connected.
LAN
Green and solid
All LAN ports are connected.
Amber and solid
The LAN ports are not connected.
Wireless
Green and solid
The WLAN gateway is powered on and operational.
Green and blinking
The WLAN gateway is booting.
Central/Cloud
Blue and solid
Connected to the HPE Aruba Networking Central unified management solution.
Blue and blinking
Connecting to the HPE Aruba Networking Central unified management solution.
Mobile network
Green and solid
The modem is on and connected to the network, and the signal is strong.
Signal strength threshold
> -65 dBm
Green and blinking
The modem is booting.
Green and amber, solid
The modem is on and connected to the network, and the signal is average.
Signal strength threshold:
< -65 dBm
> -80 dBm
Amber and solid
The modem is on and connected to the network, and the signal is weak.
Signal strength threshold:
< -80 dBm
Amber and blinking
The connection to the network has failed. SIM card removal. The modem is not responding to web commands.
Red and solid
The modem has lost the IP address or has been disconnected from the network. It acts as an emergency uplink.
Red and blinking
There is hardware failure associated with a USB device. The USB device connected is not compatible.
Ethernet ports
Each 100/1000BASE-T Ethernet port has two LED indicators. These lights, on each side of the port, reveal the status and activity of the port.
- LIAISON/ACT: this light (left side) displays the connection status and port activity.
- STATUS: this light (right side) displays the port status according to the command line interpreter (or CLI).
LIAISON/ACT - Green and solid
Connected.
LIAISON/ACT - Green and blinking
The port is transmitting or receiving data.
LIAISON/ACT - Off
There is no connection.
STATUS - Green and solid
Connected at 1,000 Mbps.
STATUS – Off
Connected at 100 Mbps.
General condition of the equipment
The Power indicator turns on for 13 seconds, then shuts off for 2 seconds, and indefinitely repeats this sequence in a loop.
The BIOS charges in a loop, without truly starting. The equipment probably needs to be replaced. Contact Technical Support.
Power LED indicator turns on, but solid
Wait 15 minutes. If, after this time, no other LED indicator comes on, contact Technical.
None of the LED indicators—neither on front nor on back of the modem—is on. OR No LED indicator is on on the front, but one is blinking on the back.
The equipment probably needs to be replaced. Contact Technical Support
No LED indicators are on in the front, but one light is on and solid in the back.
Wait 2 minutes for the Power LED indicator to come on. If the equipment is not working as expected, contact Technical Support.
Not a Videotron Business customer yet?
Whatever the size of your business, you will find an Internet solution that perfectly meets your needs. Discover our Internet services
Still need help?
Customer Service
For any questions about your account or invoice, or to modify or add services.
1 877 512-8590
